DYNAJET high-pressure lances and guns

High-pressure guns up to 1,000 bar

DYNAJET high-pressure guns always have a tightly closing valve inside at a working pressure of up to 1,000 bar. The water jet is interrupted immediately when the DYNAJET high-pressure guns are released. This makes your work a lot easier and saves water at the same time.

More safety with perfect ergonomics from 1,000 bar

The DYNAJET high-pressure gun system consistently minimises turbulence losses with its smart water diversion technology. In addition, the central force application in the handle lets you work easily and without cross forces. The innovative twist decoupling lets the nozzle tube be freely rotated through 360° in relation to the handle. The high-pressure gun also has a safety trigger.

DYNAJET 800 - 1,000 bar high-pressure guns

The 800 and 1,000 bar high-pressure guns have no control cables to obstruct operations, because the gun closes hydraulically when released. At the same time, the unloader valve on the machine switches hydraulically to circulation mode. This means less fresh water consumption, little control effort needed and no electronic control signal through a cable.

Another advantage is that when you activate the high-pressure gun again, the pressure builds up evenly and quickly, reducing fatigue while you work.

DYNAJET high-pressure lances over 1,000 bar

In high-pressure lances for high-pressure cleaners above 1,000 bar, an electronic signal is transmitted directly to the machine via a control cable connected to the lance. This directs the water though the bypass and relieves the pressure. This means that some water will escape from the maximum pressure lance during breaks in work.